Home

Product >> Rolling Stock Cable

 FIREROL FRL-TW-05MP-ESW-IOS    

Rolling Stock Cable 

A.Conductor      B.Insulation       C.Screen          D.Sheath

Application

-Used as power and control cable for protected installations inside and outside of rail and transport vehicles, where handling and installation cost are an important factor.

-Used in control, auxillary and main circuit wiring such as cable harnesses, switchboards and control panels, driver desks etc.

Construction

Conductor
Tinned annealed copper wires as defined in EN 50306-2

Insulation
LSZH special compound

Overall screen
Tinned annealed copper wires

Pair screen
Individual screened and sheathed. Screened according to EN 50306-3; Sheathed according to EN 50306-3 (S1. S2)

Pair Identification
Pairs numbered according to EN 50306-4

Outer sheath
LSZH special compound (S2. EM 101 - EM 104)

Electrical & Mechanical Properties

Nominal Voltage 300/500 V
Maximum Conductor Temperature +90/+105 deg (fixed installation)
Minimum Permissible Ambient Temperature -25/-40 deg (fixed installation)
Bending Radius 10 x Overall Diameter

Chemical & Environmental Properties

EN 60684-2 No fluorine
EN 50305; EN 60811-2-1 Resistance to oil & fuel
EN 50305 Resistance to ozone

Fire Performance for rolling stock application

EN 50306-2 Hazard levels HL1, HL2/HL3, HL4
DIN 5510-2 Protection level 1/2/3/4
BS 6853 Interior use 1a, 1b, II; Exterior use 1a, 1b, II
NF F 16-101 FO

Fire Performance in general

EN 50265-2-1; IEC 60332-1; BS 4066-1 Vertical flame propogation for a single insulated wire or cable
EN 50266-2-4 + EN 50305; IEC 60332-3C; Fire propagation of bunched wires and cables;
VDE 0472 Teil 804; BS 4066-3; NFC 32070  
EN 50268-2; IEC 61034-2; VDE 0472 Teil 816 Smoke density
EN 50267-2-1; IEC 60754-1; VDE 0472 Teil 815 Halogen Free
EN 50267-2-2/3; IEC 60754-2; VDE 0472 Teil 813 Corrosivity of gases (Acidity & Conductivity)
EN 50305; NFX 70-100; NFF 63808; TM1-04; BS6853 Toxicity index
NFF 16101; NFF 63808; BS6853 Smoke index

FRL-TW-05MP-ESW-IOS  300/500 V

NUMBER OF CORES AND NOMINAL CROSS SECTION

MINIMUM THICKNESS OF SHEATH AT ANY POINT

OVERALL DIAMETER

WEIGHT

(mm²)

(mm)

min. (mm)

max. (mm)

(kg/km)

2 x 2 x 0.5

1.0

10.1

11.3

100

3 x 2 x 0.5

1.0

10.8

12.0

150

4 x 2 x 0.5

1.0

11.8

13.0

180

7 x 2 x 0.5

1.0

13.9

15.5

270

 

 

 

 

 

2 x 2 x 0.75

1.0

10.9

12.1

120

3 x 2 x 0.75

1.0

11.6

12.8

170

4 x 2 x 0.75

1.0

12.8

14.0

220

7 x 2 x 0.75

1.0

15.1

16.7

330

 

 

 

 

 

2 x 2 x 1.0

1.0

11.3

12.5

130

3 x 2 x 1.0

1.0

12.0

13.2

190

4 x 2 x 1.0

1.0

13.2

14.4

235

7 x 2 x 1.0

1.0

15.7

17.3

370

 

 

 

 

 

2 x 2 x 1.5

1.0

13.3

14.5

180

3 x 2 x 1.5

1.0

14.0

15.6

260

4 x 2 x 1.5

1.0

15.5

17.1

340

7 x 2 x 1.5

1.0

18.7

20.3

540